基于TI的TDA4高速信号仿真条件的理解4.6

Application Note 《Jacinto7 AM6x, TDA4x, and DRA8x High-Speed Interface Design Guidelines》

The results generated by the channel simulations outlined in the preceding sections are compared against an eye mask spec.

前面章节中概述的通道模拟产生的结果与眼罩规格进行了比较。

This eye mask is summarized in Table 4-1. This is used as a pass/fail check for the system.

该眼罩概述如表4-1所示。这被用作系统的通过/失败检查。 Note some protocol are supported on different buffer type. See device data manual pin attributes to determine the buffer type for each IO.

注意，不同的缓冲区类型支持不同的协议。请参阅设备数据手册引脚属性来确定每个I0的缓冲区类型。