Git使用[同一电脑多个账户ssh-key的管理]

同一电脑多个账户ssh-key的管理

现在遇到一个问题,我同一台电脑既要通过VPN访问内网的git也要访问对外释放的gitee,刚开始我直接把原来的SSH-key添加到内网的gitlab发现可以访问,但是后来再方位外网的gitee就出问题了,看来要换一种手段才行 本文引用： cloud.tencent /developer/article/1013213?pos=comment只是做学习备份之用，绝无抄袭之意，有疑惑请联系本人！ 这里通过"ssh-keygen -t rsa -C 2xxxxxx9@qq "命令生成两个SSH-key: 注意:这里一定不能够输入密码,直接使用空密码,否则后面每次克隆和提交代码都要输入密码(这个是和参考文章不一样的地方)

admin@cxxxxxxxxxg MINGW64 /e/download/syd8811-rope-skipping (master) $ ssh-keygen -t rsa -C 2xxxxxxxx9@qq Generating public/private rsa key pair. Enter file in which to save the key (/c/Users/admin/.ssh/id_rsa): id_rsa_gitee Enter passphrase for "id_rsa_gitee" (empty for no passphrase): Enter same passphrase again: Your identification has been saved in id_rsa_gitee Your public key has been saved in id_rsa_gitee.pub The key fingerprint is: SHA256:Sxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx84hI8EVKiY 2xxxxxxxx9@qq The key's randomart image is: +---[RSA 3072]----+ | B=* | | * % o | |E.xxxxxx | |o+ * % o | | + = B S | | + = | | o + o | | . +o*. | | o+o=. | +----[SHA256]-----+ admin@cxxxxxxxxxg MINGW64 /e/download/syd8811-rope-skipping (master) $ ssh-keygen -t rsa -C 2xxxxxxxx9@qq Generating public/private rsa key pair. Enter file in which to save the key (/c/Users/admin/.ssh/id_rsa): id_rsa_gitlab Enter passphrase for "id_rsa_gitlab" (empty for no passphrase): Enter same passphrase again: Your identification has been saved in id_rsa_gitlab Your public key has been saved in id_rsa_gitlab.pub The key fingerprint is: SHA256:VxxxxxxxxxxxxxxxxrO9ES4 2xxxxxxxx9@qq The key's randomart image is: +---[RSA 3072]----+ | .xxxxxxx+ | | o .o.=oBo . | | . + .. *o. | |. o o. o | |.o . ...S | |= . .o. . | |o. ooE+o | | o+ o=... | |+ooooooo. | +----[SHA256]-----+

把生成的SSH-KEY放到网站中:

接下来配置config文件,因为内网是直接用IP访问的,我这里配置config文件如下:

# 配置gitee Host gitee HostName gitee IdentityFile C:\\Users\\admin\\.ssh\\id_rsa_gitee PreferredAuthentications publickey User username1 # 配置gitlab Host xxx.xxx.x.xxx HostName xxx.xxx.x.xxx IdentityFile C:\\Users\\admin\\.ssh\\id_rsa_gitlab PreferredAuthentications publickey User username2

接下来测试config是否配置成功:

admin@cxxxxxxg MINGW64 /e/download/syd8811-rope-skipping (master) $ ssh -T git@gitee Hi xxxxxxxxxxxxe(@xxxxxxxxxxxx)! You've successfully authenticated, but GITEE.COM does not provide shell access. admin@cxxxxxxg MINGW64 /e/download/syd8811-rope-skipping (master) $ ssh -T git@xxx.xxx.x.xxx The authenticity of host 'xxx.xxx.x.xxx (xxx.xxx.x.xxx)' can't be established. ED25519 key fingerprint is SHA256:zxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxw. This key is not known by any other names. Are you sure you want to continue connecting (yes/no/[fingerprint])? yes Warning: Permanently added 'xxx.xxx.x.xxx' (ED25519) to the list of known hosts. Welcome to GitLab, @cxxxxxg!

配置好后就可以直接克隆工程了:

admin@cxxxxxxxxxg MINGW64 /e/download $ git clone git@xxx.xxx.x.xxx:JiPengchao/xxxxxxxxs.git Cloning into 'xxxxxxxxs'... remote: Enumerating objects: 3712, done. remote: Counting objects: 100% (3712/3712), done. remote: Compressing objects: 100% (1910/1910), done. remote: Total 3712 (delta 2132), reused 2988 (delta 1759), pack-reused 0 Receiving objects: 100% (3712/3712), 1.51 MiB | 1.50 MiB/s, done. Resolving deltas: 100% (2132/2132), done. admin@cxxxxxxxxxg MINGW64 /e/download $ git clone git@gitee :sxxxxxxxe/syd8811-rope-skipping.git Cloning into 'syd8811-rope-skipping'... remote: Enumerating objects: 107, done. remote: Total 107 (delta 0), reused 0 (delta 0), pack-reused 107 Receiving objects: 100% (107/107), 950.67 KiB | 288.00 KiB/s, done. Resolving deltas: 100% (7/7), done.